Upgrading your DF-560 or DF-390
|
|
Digi-Frame software upgrades are a largely automated process. However, the exact steps you need to take will depend on which software is currently installed on your Digi-Frame.
STEP 1: Determine your Digi-Frame's current software version.
Turn on your Digi-Frame. When the white "Welcome to Digi-Frame" screen appears, the software version is shown at the bottom center of the picture.
STEP 2: If necessary, update your Digi-Frame's startup software.
If you currently have software version 1.xx (xx = any numbers or letters) on your Digi-Frame, you will need to update the startup software before proceeding with the instructions below. This step requires a CompactFlash card - you cannot use a SmartMedia card. Please follow these steps:
|
If your current software version is 1.00v, you must return your Digi-Frame to us for a free memory upgrade. Please email techsupport@digi-frame.com to arrange this.
|
|
If your current software version is 1.00z, 1.01a or 1.01b, you must FIRST download and install version 1.03m. Please follow the instructions included in the README.TXT within this download file.
|
|
Once you have checked the above condition, download BOOTCODE.ZIP, extract its contents, and use Digi-Link or other means to copy these contents onto a CompactFlash card. Switch off your Digi-Frame, insert this CompactFlash card, and switch your Digi-Frame back on. The upgrade will install automatically. DO NOT SWITCH OFF THE POWER or press any buttons until the upgrade process is complete.
|
|
Note that you will not see any change in version numbers or other behavior when you next switch on your Digi-Frame. This is normal. In this step you have only upgraded the startup software.
|
STEP 3: Download and install operating system 2.50.
You may use either a CompactFlash or SmartMedia card for this step.
|
Download the upgrade file, extract its contents, and use Digi-Link or other means to copy these contents onto a CompactFlash card. Switch off your Digi-Frame, insert this CompactFlash card, and switch your Digi-Frame back on. The upgrade process will begin.
|
|
If prompted, click the menu wheel in order to confirm installing the upgrade.
|
|
|